Used Hardinge HLV-H Super Precision Tool Room Lathe for Sale.
| SKU: | 2552 |
| Location: | Lake Elsinore, CA |
| Make: | Hardinge |
| Model: | HLV-H |
| Condition: | Used – Good |
| Video: | No Video |
Hardinge HLV-H Super Precision Tool Room Lathe
$14,400.00
1 in stock
1 in stock
Description
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Hardinge |
| Model: | HLV-H |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Newall Digital Readout |
| Dovetail Bed Solid Hardened and Ground Steel |
| KDK Tool Post |
| Assorted Collets |
| 125 to 3000 RPM Variable Spindle Speed |
| 2 Speed Reversing Motor |
| Tailstock |
| Capacity: |
|---|
| Swing Over Bed: 11″ |
| Swing Over Carriage: 9″ |
| Swing Over Cross Slide: 6″ |
| Distance Between Centers: 18″ |
| Hole Through Spindle: 1-1/4″ |
| Compound Slide Travel: 3″ |
| Carriage Power Feed Range: 5/16 to 8 IPM |
| Cross Slide Power Feed Range: 5/16 to 8 IPM |
| Spindle: |
|---|
| Spindle Capacity: |
| With Round 5C Collets: 1-1/16″ |
| With Hexagon 5C Collets: 7/8″ |
| With Squire 5C Collets: 3/4″ |
| With Step Chucks: 1-1/16″ to 6″ |
| With Jaw Chucks: 5″ |
| With Expanding Collets: 3″ |
| Spindle Nose: Hardinge Tapered |
| Hole Through Spindle: 1-1/4″ |
| Infinitely Variable Spindle Speed: 1000 to 3000 |
| Base Speeds: 1750 RPM |
| Power: 5 HP |
| Torque: 20 Nm (15-ft-lb) |
| Threading: |
|---|
| Thread Range: 0.10 to 6.50 mm (4 to 250 TPI) |
| Multiple Start Thread: Up to 4 |
| Lead Screw Pitch: 8 Pitch |
| Tailstock: |
|---|
| Tailstock Taper: MT#2 |
| Tailstock Spindle Diameter: 1-3/8″ |
| Tailstock Spindle Travel: 3-3/4″ |
| General: |
|---|
| Overall Dimensions: 71.5″ x 31″ x 72.75″ High |
| Electrical: 440 Volt, Three Phase |
| Weighs: 2250 Lbs |
