Description
| AWEA LP4025 CNC VERTICAL BRIDGE MILLING | |
|---|---|
| Make | AWEA |
| Model No. | LP4025 |
| SKU | 1886 |
| Year | 2004 Installed 2006 |
| Serial # | 4725 |
| Condition | Very Good |
| Cutting Hours: | 21,108 |
*All specifications are approximations and are subject to verification. Comes as shown in images. Please give us a call if you have any questions before purchasing. All sales are final.*
- Equipped With:
- Fanuc 18iMB CNC Control
- 158″ X 98″ Table
- 40 Station Side Mount Tool Changer
- 50 Taper Geared Head
- 6000 RPM Spindle
- Coolant Thru Spindle
- Powerful 35 HP high torque spindle motor
- PCMCIA Card Slot
- RS-252 Port
- Spindle Orientation
- Box Way Construction
- Portable manual pulse generator
- Flood coolant with large separate coolant tank Base
- Flush Chip Disposal with Dual Auger
- Chip Conveyor
- Chiller Unit
- Levelling Pads
- Replacement Cost over $500,000.00
- Spindle:
- Taper Size: 50
- Speed Range: 6000 RPM
- Spindle Power: 35 HP
- Feed rates: Rapid X,Y & Z: 590 inch per minute
- Cutting Feedrate: .04″ – 376″ inch per minute
- Specifications:
- Travels:
- X-Axis: 158.0″
- Y-Axis: 98.6″
- Z-Axis: 30.9″
- Distance Between Columns: 106.2″
- Spindle Nose to Table (Min.- Max.): 8.6″- 39.57″
- Table: Length: 164.6″
- Width: 94.4″
- T-Slot: 0.87″ Wide X 20 X 7.87″
- Max Weight on Table: 33,000 lbs
- Automatic Arm Type Tool Changer:
- 50 Taper
- Capacity: 40
- Max Tool Weight: 43 lbs
- Max Tool Length: 13.77″
- Max Tool Dia.: 5.2 – 7.7″
- General:
- Air Required: 100 psi, 4 scfm
- Power: 220v / 3-Phase, 65 Kva
- Floor Dimensions: 34’6″ X 17’6″ x 130″ High
- with Hydraulic Unit, Chip Conveyor, Chiller unit
- Weight: 87,600 lbs.
2 reviews for AWEA LP4025 CNC Vertical Bridge Milling
Add a review
Manish –
REPAINTED.? IF ON LINEAR, WE CAN DO AT 100K CIF, ON FULL DETAILS, CAN UP THE BUDGET
Sanjeev Suri –
Thank you for contacting MachineStation.
We have shared the quote of the machine on your email. Kindly check. Please feel free to contact us at +1 909-919-9600 or sales@machinestation.us
Thanks
Team MachineStation
zoritoler imol –
Hello! This is my first visit to your blog! We are a group of volunteers and starting a new project in a community in the same niche. Your blog provided us beneficial information to work on. You have done a marvellous job!