Daewoo Puma 8S CNC
    Used Daewoo Puma 8S CNC Turning Center California d
    Used Daewoo Puma 8S CNC Turning Center California e
    Used Daewoo Puma 8S CNC Turning Center California h
    Used Daewoo Puma 8S CNC Turning Center California i
    Used Daewoo Puma 8S CNC Turning Center California j

Daewoo Puma 8S CNC Turning Center

This machine is in good running condition. It is equipped with 8″ Chuck & Hydraulic Tailstock. On Our Floor fully powered / tested & is in Great working condition.”

Share

Description

DAEWOO PUMA 8S CNC TURNING CENTER
Make Daewoo
Model No. Puma 8S
Serial # PM8S 0159
Condition Very Good

“This machine is in good running condition. It is equipped with 8″ Chuck & Hydraulic Tailstock. On Our Floor fully powered / tested & is in Great working condition.”

  • Daewoo Puma 8S CNC Equipped With:
  • Fanuc OT-C CNC Control
  • 8″ 3 Jaw Hydraulic Chuck
  • A2-6 Spindle
  • Hydraulic Programmable Tailstock
  • Coolant System
  • Barfeed Interface
  • RS-232 ports
  • 12 Station Automatic Turret
  • Foot Switch
  • General:
  • Power: 21 kva, 220v / 3-Phase
  • Overall Dimensions: 114″ x 76″ x 77″ High
  • Weight: 11000 lbs
  • Daewoo Puma 8S CNC Specifications:
  • Capacity:
  • Max Turning Diameter: 14.6″
  • Max Turning Length: 20.7″
  • Max Bar Capacity: 2.05″
  • Swing Over Bed: 19.7″
  • Distance Between Centers: 21.9″
  • X Axis Travel: 8.3″
  • Z Axis Travel: 21.7″
  • Rapid Traverse X Axis: 630 IPM
  • Rapid Traverse Z Axis: 787 IPM
  • Spindle Nose: A2-6
  • Spindle Bore: 2.4″
  • Spindle Speed: 0 – 4000 RPM
  • Spindle Motor: 25 HP
  • Turret Capacity: 12 Stations
  • Turret Index Time: 1 Second
  • Tailstock Taper: MT-4
  • Tailstock  Quill Dia.: 3.1″
  • Tailstock Quill Travel: 4.0″

Daewoo Puma 8S CNC Comes as shown in pictures..

Reviews

There are no reviews yet.

Be the first to review “Daewoo Puma 8S CNC Turning Center”

Your email address will not be published.