Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-d-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-e-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-f-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-h-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-j-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-k-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-600x600_LI-300×300
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-i-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-c-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-b-600×600
    Used-Femco-WNCL-20by60-CNC-Turning-Center-in-California-a-600×600
OUT OF STOCK

Femco WNCL 20/60 CNC Turning Center

This One Owner machine is in good running condition. It is equipped with 21″ Wheel Turning Chuck. On Our Floor fully powered / tested & is in Great working condition.”

Share

Description

FEMCO WNCL 20/60 CNC TURNING CENTER
Make Femco
Model No. WNCL 20/60
Year 07/1995
Serial # L26016
Condition Very Good

“This One Owner machine is in good running condition. It is equipped with 21″ Wheel Turning Chuck. On Our Floor fully powered / tested & is in Great working condition.”
Watch *VIDEO* in Spanish

  • Femco WNCL 20/60 CNC Equipped With:
  • Fanuc 0T CNC Control
  • 10″ 3 Jaw Kitagawa Hydraulic Chuck
  • A2-8 Spindle
  • Hydraulic Tailstock
  • RS-232 ports
  • 12 Station Automatic Turret
  • Foot Switch
  • Chip Conveyor
  • Original Manuals
  • General:
  • Power: 21 kva, 220v / 3-Phase
  • Overall Dimensions: 114″ x 76″ x 77″ High
  • Overall Dimensions: 138″ x 76″ x 77″ High with Chip Conveyor
  • Weight: 12600 lbs
  • Femco WNCL 20/60 CNC Specifications:
  • Capacity:
  • Max Turning Diameter: 10.2
  • Max Turning Length: 24.4″
  • Swing Over Bed: 21.3″
  • Distance Between Centers: 28.5″
  • Max Bar Capacity: 3.0″
  • X Axis Travel: 6.0″
  • Z Axis Travel: 25.0″
  • Rapid Traverse X Axis: 630 IPM
  • Rapid Traverse Z Axis: 787 IPM
  • Spindle Nose: A2-8
  • Spindle Bore: 3.43″
  • Spindle Speed: 40 – 4000 RPM
  • Spindle Motor: 30 HP
  • Turret Capacity: 12 Stations
  • Turret Index Time: 1 Second
  • Tailstock Taper: MT-5
  • Tailstock Quill Dia.: 3.0″
  • Tailstock Quill Travel: 3.94″

Femco WNCL 20/60 CNC Comes as shown in pictures..

Reviews

There are no reviews yet.

Be the first to review “Femco WNCL 20/60 CNC Turning Center”

Your email address will not be published.

VIDEO