Haas-VF-6SS-Used-VMC-USA-600×600
    Used-Haas-VF-6SS-600×600
    Haas-VF-6SS-USed-Vertical-Machining-Center-1-600×600
    Used-Haas-VF-6SS-1-600×600
    Used-Haas-VF-6SS-VMC-1-600×600
    Used-Haas-VF-6SS-Machining-Center-Vertical-600×600
    Used-Haas-VF-6SS-Machining-Center-600×600
    Haas-VF-6SS-USed-1-600×600
    Haas-VF-6SS-Used-VMC-USA-MachineStation-600×600
    Haas-VF-6SS-USed-Vertical-Machining-Center1-600×600
    Haas-VF-6SS-USed-Machining-Center-1-600×600
    Used-Haas-VF-6SS-VMC-600×600
    Haas-VF-6SS-USed-Machining-Center-600×600
OUT OF STOCK

Haas VF6SS Vertical Machining Center 4th & 5th Axis

This One Owner Machine has 12000rpm, upgraded 40 tool high speed side mount changer, 4th & 5th Axis Ready, 16MB Memory and many more features. On our Floor now, fully powered / tested & is in Great working condition.

Share

Description

HAAS VF6SS CNC VMC
Make Haas
Model No. VF-6SS
Year of Manufacture: 2008
Serial # 1063885
Condition Very Good
Replacement Cost $ 154,000.00  

“This One Owner Machine has 12000rpm, upgraded 40 tool high speed side mount changer, 4th & 5th Axis Ready, 16MB Memory and many more features. On our Floor now, fully powered / tested & is in Great working condition. check *VIDEO*”

  • HAAS VF6SS  Features:
  • 15″ Color LCD Monitor
  • 4th and 5th Axis Ready ( drives and wiring installed )
  • 16MB Program Memory
  • Remote Jog Handle with LCD
  • Rigid Tapping
  • High Speed Machining
  • Advanced Tool Management
  • Power Failure Detection Module
  • 40 HP High Torque Inline direct-drive Spindle
  • Pre-configured to accept an optional Haas Through-Spindle Coolant system.
  • USB Port
  • Renishaw Wireless Intuitive Probing System Ready
  • User Definable Macros, Spindle Orientation and Coordinate Rotational Scaling
  • Brush-type servo drive motors on all axis
  • 40+1 automatic tool changer ( upgraded tool changer ) 
  • Programmable coolant nozzle
  • Telescopic way covers
  • Chip auger
  • High Intensity Lighting
  • 95-gallon flood Coolant system
  • Books and Manuals
  • Additional Pictures available
  • HAAS VF6SS  Specifications:
  • Travels:
  • X-Axis: 64″
  • Y-Axis: 32″
  • Z-Axis: 30″
  • Rapid Traverse Rates: 1200 Inch Per Minute
  • Cutting Feed Rates: 833 IPM
  • Spindle Nose to Table (Min.- Max.): 4″ – 34″
  • Table:
  • Length: 64″
  • Width: 28″
  • Number of Std T-Slots: 5
  • T-Slot Width: 5/8″
  • Max Weight on Table: 2000 lbs
  • Spindle:
  • Taper Size: CAT 40
  • Speed Range: 0 – 12000 RPM
  • Spindle Power: 40 HP
  • Max Torque: 90ft-lb @ 2000RPM
  • Automatic Tool Changer:
  • Capacity: 40+1
  • Max Tool Weight: 12 lbs
  • Max Tool Dia: 5″
  • Max Tool Length: 11″
  • Tool Changing Time: 2.3 Seconds
  • General:
  • Air Required: 100 psi, 4 scfm
  • Power: 220v / 66FLA / 3-Phase
  • Overall Dimensions: 158″ x 100″ x 118″ High
  • Weight: 22500 lbs

HAAS VF6SS Comes as shown in pictures.

Reviews

There are no reviews yet.

Be the first to review “Haas VF6SS Vertical Machining Center 4th & 5th Axis”

Your email address will not be published.