Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-a-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-b-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-c-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-d-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-e-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-f-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-g-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-h-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-i-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-j-600×600
    Used-Mori-Seiki-Frontier-L-II-CNC-TUrning-Center-MachineStation-USA-k-600×600
OUT OF STOCK

Mori Seiki Frontier L-II CNC Turning Center

One Owner Machine on Our Floor now, Fully powered / tested & is in Great working condition. Low Cutting Hours. Equipped with 10″ Chuck, Tool holders, Tailstock, Chuck.”

Share

Description

MORI SEIKI FRONTIER L-II CNC TURNING CENTER
Make Mori Seiki
Model No. Frontier L-II
Country of Origin: Japan
Serial # 7749
Condition Very Good

“One Owner Machine on Our Floor now, Fully powered / tested & is in Great working condition. Low Cutting Hours. Equipped with 10″ Chuck, Tool holders, Tailstock, Chuck.”

  • MORI SEIKI FRONTIER L-II Equipped With:
  • 10-Station Turret with Tools
  • MSC-521 (Fanuc 21T) CNC Control
  • Tool Presetter
  • 10″ 3-Jaw Kitagawa Hydraulic Chuck
  • 2 Step gear spindle for powerful torque
  • Hydraulic Tailstock with Power Quill
  • Chip Pan
  • Coolant System.
  • Automatic Lubrication system
  • Foot Operated Control for Chuck
  • General:
  • Power Source: AC 220 V, Three Phase, 60 Hz
  • Power Requirement: 68 Amps
  • verall Dimensions: 110″ x 68″ x 80″ High
  • Weight : 12000 lbs Approx.
  • MORI SEIKI FRONTIER L-II Specifications:
  • Max Turning Diameter: 10.2″
  • Max Turning Length: 20.9″
  • Max Bar Capacity: 2.65″
  • Swing Over Slide: 13.8″
  • Swing Over Bed: 22.4″
  • Distance Between Centers: 24.6″
  • X Axis Travel: 14.9″
  • Z Axis Travel: 23.2″
  • Rapid Traverse X Axis: 790 IPM
  • Rapid Traverse Z Axis: 945 IPM
  • Spindle Nose: A2-8
  • Spindle Bore: 3.1″
  • Spindle Speed: 3500 RPM
  • Spindle Motor: 20 HP
  • Turret Capacity: 10 Stations
  • Turret Index Time: 0.5 Second
  • Tailstock Body Travel: 19.3″
  • Tailstock Quill Dia.: 4.33″
  • Tailstock Quill Stroke: 3.93″
  • Tailstock Taper: MT-4

MORI SEIKI FRONTIER L-II Comes as shown in pictures.

Reviews

There are no reviews yet.

Be the first to review “Mori Seiki Frontier L-II CNC Turning Center”

Your email address will not be published.

VIDEO