“This One Owner machine is 4th Axis Ready. Lots of other options, Its been fully powered / tested & is in Great working condition. check *VIDEO*””
Mori Seiki MV55 50 VMC 4 Axis
Out of stock
Description
MORI SEIKI MV55 50 VERTICAL MACHINING CENTER 4 AXIS VMCMachineStation | 4590 Eucalyptus Ave. Chino, CA 91710 | |
|---|---|
| Make | Mori Seiki |
| Model No. | MV-55/50 |
| Year of Manufacture: | 1993 |
| Serial # | 1393 |
| Condition | Very Good |
All specifications are approximations and are subject to verification.
““This One Owner machine is 4th Axis Ready. Lots of other options, Its been fully powered / tested & is in Great working condition. check *VIDEO*””
- MORI SEIKI MV55 50 Features:
- Fanuc OM-C CNC Control
- Fully Prepared for 4th Axis ( Drive, Wirings )
- 30 Stations Side Mount Tool Changer
- Box Way Design
- AC Servo Motors on All Axis
- Ceramic Spindle Taper
- Coolant System with Dual Tanks
- Working Light, Levelling Pads
- All Books, manuals and Documents.
- MORI SEIKI MV55 50 Specifications:
- Travels:
- X-Axis: 41.3″
- Y-Axis: 21.7″
- Z-Axis: 22″
- Spindle Nose to Table (Min.- Max.): 7.9″ – 29.9″
- Spindle Center to Column: 23.6″
- Table:
- Length: 55.1″
- Width: 21.7″
- Max Weight on Table: 3300 lbs
- Spindle:
- Taper Size: BT 50
- Speed Range: 60 – 4000 RPM
- Spindle Power: 15 HP
- Feed rates:
- Rapid X & Y: 591 inch/P.M
- Rapid Z: 472 inch/P.M
- Cutting Feedrate: .0001″ – 197″ inch/ P.M
- Automatic Tool Changer:
- BT 50 Taper
- Capacity: 30
- Max Tool Weight: 44 lbs
- Max Tool Length: 13.78″
- Max Tool Dia.: 9.4″
- Tool Change Time: 3 seconds
- General:
- Air Required: 70 psi, 5 scfm
- Power: 220v / 66FLA / 3-Phase
- Overall Dimensions: 135″ x 120″ x 115″ High
- Weight: 22,000 lbs
MORI SEIKI MV55 50 Comes as shown in pictures.
