Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-Main-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-a-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-d-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-g-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-f-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-e-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-c-600×600
    Used-Okuma-Cadet-Mate-4020-CNC-VMC-MachineStation-USA-b-600×600

Okuma Cadet Mate 4020 CNC VMC

Equipped with 8,000rpm, 20 Tools Changer, OSP-700M Control, Floppy Drive. On our Floor now, fully powered / tested & is in working condition.”

Share

Description

OKUMA CADET MATE 4020 CNC VERTICAL MACHINING CENTER
Make OKUMA
Model No. Cadet Mate
Serial # 0214
Condition Very Good

“Equipped with 8,000 rpm, 20 Tools Changer, OSP-700M Control, Floppy Drive. On our Floor now, fully powered / tested & is in working condition.”

  • OKUMA CADET MATE 4020 Features:
  • OSP-700M CNC Control
  • 20 Automatic  tool changer
  • RS 232 Port
  • Floppy Drive
  • Rigid Tapping
  • Brush-type servo drive motors on all axis
  • Telescopic way covers
  • Flood Coolant system with Tanks
  • Specifications:
  • Travels:
  • X-Axis: 40.1″
  • Y-Axis: 20.3″
  • Z-Axis: 20.8″
  • Rapid Traverse Rates: 941 Inch Per Minute
  • Cutting Feed Rates: 475 Inch Per Minute
  • Spindle Nose to Table (Min.- Max.): 6.1″ – 26.1″
  • Table:
  • Length: 47″
  • Width: 20″
  • Number of Std T-Slots: 3
  • T-Slot Width: 5/8″
  • Max Weight on Table: 1100 lbs
  • Spindle:
  • Taper Size: 40
  • Speed Range: 40 – 8,000 RPM
  • Spindle Power: 15 HP
  • Max Torque: 90ft-lb @ 2000RPM
  • Automatic Tool Changer:
  • Capacity: 20
  • Max Tool Weight: 13.2 lbs
  • Max Tool Dia: 5.90 ”
  • Max Tool Length: 12″
  • Tool Changing Time: 3.6 Seconds
  • General:
  • Air Required: 80 psi, 4 scfm
  • Power: 240v / 35 KVA / 3-Phase
  • Overall Dimensions: 150″ x 92″ x 99″ High
  • Weight: 11000 lbs

OKUMA CADET MATE 4020 Comes as shown in pictures..

Reviews

There are no reviews yet.

Be the first to review “Okuma Cadet Mate 4020 CNC VMC”

Your email address will not be published.