Used Okuma Crown 762S-BB CNC Turning Center Big Bore Lathe b
    Used Okuma Crown 762S-BB CNC Turning Center Big Bore Lathe b
    Used Okuma Crown 762S-BB CNC Turning Center Big Bore Lathe c
    Used Okuma Crown 762S-BB CNC Turning Center Big Bore Lathe f
    Used Okuma Crown 762S-BB CNC Turning Center Big Bore Lathe g
    Used Okuma Crown 762S-BB CNC Turning Center Big Bore Lathe h
    Used-Okuma-Crown-762S-BB-CNC-Turning-Center-Big-Bore-Lathe-600×600
    Used-Okuma-Crown-762S-BB-CNC-Turning-Center-Big-Bore-Lathe-d-600×600
    Used-Okuma-Crown-762S-BB-CNC-Turning-Center-Big-Bore-Lathe-c-600×600
    Used-Okuma-Crown-762S-BB-CNC-Turning-Center-Big-Bore-Lathe-a-600×600
OUT OF STOCK

Okuma Crown 762S-BB CNC Turning Center

Heavy Duty Big Bore Okuma Crown One Owner Machine on Our Floor now, Fully powered / tested & is in Great working condition. Equipped with Hydraulic Chuck, Tailstock, chip conveyor.”

Share

Description

OKUMA CROWN 762S-BB CNC TURNING CENTER
Make Okuma
Model No. Crown 762S-BB
Country of Origin: Japan
Serial # 0613
Condition Very Good

“Heavy Duty Big Bore Okuma Crown One Owner Machine on Our Floor now, Fully powered / tested & is in Great working condition. Equipped with Hydraulic Chuck, Tailstock, chip conveyor.”

  • Okuma Crown 762S-BB Equipped With:
  • Okuma OSP-700L CNC Control
  • IGF – Interactive Graphic Function
  • Microcentric CB65-D Hydraulic Collet Chuck
  • 12-Station Turret
  • Hydraulic Tailstock with Quill
  • Floppy Drive
  • Slant Bed Rigid Box Way Machine
  • Chip Conveyor
  • Coolant System.
  • Automatic Lubrication system
  • Foot Operated Control for Chuck & Tailstock
  • Coolant Tank
  • Comes with Chuck, Chip Conveyor, Levelling Pads, Manuals and Floppies.
  • General:
  • Power Source: AC 220 V, Three Phase, 60 Hz
  • Overall Dimensions: 104″ x 76″ x 72″ High
  • Overall Dimensions: 142″ x 76″ x 80″ High W/Chip Conveyor
  • Weight : 9900 lbs Approx.
  • Okuma Crown 762S-BB Specifications:
  • Max Turning Diameter: 10.63″
  • Max Turning Length: 19.68″
  • Max Bar Capacity: 3.05″
  • Swing Over Bed: 21.65″
  • Distance Between Centers: 22.29″
  • X Axis Travel: 7.28″
  • Z Axis Travel: 20.47″
  • Rapid Traverse X Axis: 590 IPM
  • Rapid Traverse Z Axis: 787 IPM
  • Spindle Nose: A2-8
  • Spindle Bore: 3.15″
  • Spindle Speed: 65-3500 RPM
  • Spindle Motor: 22 HP
  • Turret Capacity: 12 Stations
  • Turret Index Time: 1 Second
  • Tailstock Quill Dia.: 3.54″
  • Tailstock Quill Stroke: 4.72″
  • Tailstock Taper: MT-5

Okuma Crown 762S-BB Comes as shown in pictures.

Reviews

There are no reviews yet.

Be the first to review “Okuma Crown 762S-BB CNC Turning Center”

Your email address will not be published.

VIDEO