• Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-1-600×600
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-1
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-2
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-3
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-4
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-5
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-6
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-7
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-8
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-9
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-10
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-11
  • Okuma-Crown-762S-CNC-Turning-Center-for-Sale-in-California-USA-12
OUT OF STOCK

Okuma Crown 762S CNC Turning Center

“This machine is in very Good running condition. It is equipped with 8″ Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”

Share

Description

OKUMA CROWN 762S CNC TURNING CENTER
Make Okuma
Model No. Crown 762S-SB
Year 2000
Serial # 1531
Condition Very Good

“This machine is in very Good running condition. It is equipped with 8″ Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”

  • Okuma Crown 762S Equipped With:
  • 12-Station Turret
  • OSP-U10L CNC Control
  • One Touch IGF Programming
  • Floppy Drive
  • 8″ Hydraulic Chuck ( 10″ Capable )
  • Hydraulic Tailstock with Power Quill
  • Chip Pan and Chip Conveyor
  • Coolant System
  • Automatic Lubrication system
  • Foot Operated Control for Chuck and Tailstock
  • Okuma Crown 762S Specifications:
  • Max Turning Diameter: 10.63″
  • Max Turning Length: 19.68″
  • Max Bar Capacity: 2.05″
  • Swing Over Slide: 15.78″
  • Swing Over Bed: 21.65″
  • Distance Between Centers: 22.29″
  • Travel:
  • X Axis Travel: 7.28″
  • Z Axis Travel: 20.47″
  • Rapid Traverse X Axis: 591 IPM
  • Rapid Traverse Z Axis: 787 IPM
  • Spindle:
  • Spindle Nose: A2-6
  • Spindle Bore: 2.44″
  • Spindle Speed: 4200 RPM
  • Spindle Motor: 20 HP
  • Turret:
  • Turret Capacity: 12 Stations
  • Turret Index Time: 0.5 Second
  • Tailstock:
  • Tailstock Body Travel: 14.3″
  • Tailstock Quill Dia.: 3.54″
  • Tailstock Quill Stroke: 3.93″
  • Tailstock Taper: MT-45
  • General:
  • Power Source: AC 220 V, Three Phase, 60 Hz
  • Power Requirement: 68 Amps
  • Overall Dimensions: 110″ x 68″ x 80″ High
  • Overall Dimensions: 140″ x 68″ x 80″ High with Chip Conveyor
  • Weight : 8500 lbs Approx.

Okuma Crown 762S comes as shown in pictures….

Reviews

There are no reviews yet.

Be the first to review “Okuma Crown 762S CNC Turning Center”

Your email address will not be published.

VIDEO