• Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-1
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-2
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-3
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-4
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-5
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-6
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-7
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-8
  • Okuma-ES-L8-CNC-Turning-Center-for-Sale-in-MachineStation-California-9

Okuma ES-L8 CNC Turning Center

“This machine is in very Good running condition. It is equipped with Collet Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”



Make Okuma
Model No. ES-L8
Year 2000
Serial # C0071
Condition Very Good

“This machine is in very Good running condition. It is equipped with Collet Chuck, Tailstock & chip conveyor. On Our Floor fully powered / tested & is in Great working condition.”

  • Okuma ES-L8 Equipped With:
  • 8-Station Turret
  • OSP 700L CNC Control
  • One Touch IGF Programming
  • Floppy Drive
  • ATS Big Bore Collet Hydraulic Chuck ( 8″ Capable )
  • Hydraulic Tailstock with Power Quill
  • Chip Pan and Chip Conveyor
  • Coolant System
  • Automatic Lubrication system
  • Foot Operated Control for Chuck and Tailstock
  • Okuma ES-L8 Specifications:
  • Max Turning Diameter: 10.63″
  • Max Turning Length: 19.6″
  • Max Bar Capacity: 2.04″
  • Swing Over Slide: 13.78″
  • Swing Over Bed: 17.72″
  • Distance Between Centers: 24.6″
  • Travel:
  • X Axis Travel: 6.1″
  • Z Axis Travel: 20.47″
  • Rapid Traverse X Axis: 591 IPM
  • Rapid Traverse Z Axis: 787 IPM
  • Spindle:
  • Spindle Nose: A2-6
  • Spindle Bore: 2.44″
  • Spindle Speed: 5000 RPM
  • Spindle Motor: 15 HP
  • Turret:
  • Turret Capacity: 12 Stations
  • Turret Index Time: 0.5 Second
  • Tailstock:
  • Tailstock Body Travel: 14.3″
  • Tailstock Quill Dia.: 3.54″
  • Tailstock Quill Stroke: 3.93″
  • Tailstock Taper: MT-4
  • General:
  • Power Source: AC 220 V, Three Phase, 60 Hz
  • Power Requirement: 68 Amps
  • Overall Dimensions: 110″ x 68″ x 80″ High
  • Overall Dimensions: 140″ x 68″ x 80″ High with Chip Conveyor
  • Weight : 8500 lbs Approx.

Okuma ES-L8 comes as Shown in Pictures………….

MachineStation is a global trading company located in California, USA. We specialize in the buying and selling of New & Used CNC Machines. Used Machine Dealer focused in All Kinds of CNC & Manual Metalworking machines.

Some of the notable manufacturers include Amada, Akira Seiki, Blanchard, Chicago, Clausing, Cincinnati, Colchester, Daewoo, Doosan, Fadal, Femco, Flow, Haas, Hardinge, Howa, Hyundai, Ikegai, Junger, Kitamura, Kia, Kira, Landis, Laser, Leadwell, Leblond, Logan, Maag, Matsuura, Mazak, Milltronics, Mighty, Mitsubishi, Mitsui, Mitutoyo, Miyano, Monarch, Mori Seiki, Nakamura, Nicco, Niigata, Niles, Okuma, Sharp, SNK, Southwest, Star, Strippit, Studer, Summit, Supermax, Supertech, Takisawa, Titan, Tornos, Tos, Toyota, Traub, Tsugami, Union, Waterjet, Walter, Wasino, Webster, Whacheon, Wysong, Yam, Yamaseiki, YCM, YOU JI.

As a used machine dealer, we have access to much more Used CNC Machines than we list here on our website. If you’re looking for a machine that you don’t see listed call us at 909-919-9600 or E-Mail Us and we can most likely locate one for you. The leading used machinery dealer.


There are no reviews yet.

Be the first to review “Okuma ES-L8 CNC Turning Center”

Your email address will not be published.