*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | Okuma |
| Model No.: | Multus B400-W |
| Year of Manufacture: | 2008 |
| Cutting Hours: | Only |
| Equipped With: |
|---|
| Okuma OSP-P200L CNC Control |
| 10,000 RPM Pendulum Milling Head |
| 40 Station Tool Magazine |
| Full C-Axis on Both Spindles |
| Y Axis Capability |
| 15″ Chuck on Spindle |
| 10″ Chuck on Sub Spindle |
| Renishaw Tool Probe |
| Tool Presetter |
| Edge Technology Rebel 102 Bar Feeder |
| Rigid Tapping |
| PCMCIA Card Slot |
| Through Spindle Coolant |
| High Pressure Coolant System |
| Foot Operated Control for Chuck |
| Chip Blaster |
| Chip Conveyor |
| Capacity: |
|---|
| Max Turning Diameter: 26.37″ |
| Max Turning Length: 60.83″ |
| Max Bar Capacity: 4.00″ |
| Swing Over Bed: 27.95″ |
| Distance Between Spindles: 60.83″ |
| Travel: |
|---|
| X Axis Travel: 27.17″ |
| Y Axis Travel: 9.06″ (+/-4.53″) |
| Z Axis Travel: 60.83″ |
| W Axis Travel: 61.06″ |
| B Axis Travel: 225 Degree (+195°/-30°) |
| C Axis: 360 Degree (0.001) |
| X Rapid Traverse Rate: 1575 Inch Per Minute |
| Y Rapid Traverse Rate: 1024 Inch Per Minute |
| Z Rapid Traverse Rate: 1575 Inch Per Minute |
| Main Spindle: |
|---|
| Spindle Nose: A2-11 |
| Spindle Bore: 4.33″ |
| Spindle Speed: 2800 RPM |
| Spindle Motor: 40 HP |
| Sub Spindle: |
|---|
| Spindle Nose: A2-8 |
| Spindle Bore: “ |
| Spindle Speed: 3800 RPM |
| Spindle Motor: 30 HP |
| Milling Head: |
|---|
| Single Station Pendulum Head with 40 ATC |
| Tool Type: CAPTO C-6 Taper |
| Spindle Speed: 10,000 RPM |
| Spindle Motor: 27 HP |
| General: |
|---|
| Power Source: AC 220/480 V, Three Phase, 60 Hz |
| Power Requirement: 64.2 Kva |
| Overall Dimensions: 227″ x 107″ x 118″ High |
| Weight: 32,000 lbs Approx. |
