*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
| Make: | SUPERTEC |
| Model: | G20P-50 NC |
| Year: | 2012 |
| Condition: | Used – Good |
| Equipped With: |
|---|
| Supertec NC Control |
| Absolute/Incremental Combined Programming |
| Swivelable Table |
| MPG Control |
| Inch / Metric Conversion |
| Stored Stroke Check |
| Auto Reference Point Return |
| Automatic Acceleration & Deceleration |
| Work Light |
| Coolant System |
| Hydraulic Tailstock |
| Automatic Lubrication system |
| Capacity: |
|---|
| Max Grinding Diameter: 8″ |
| Max Grinding Length: 18″ |
| Max load Capacity: 176 lbs |
| Swing Over Table: 8″ |
| Distance Between Centers: 20″ |
| Grinding Wheel: |
|---|
| Speed: 1940 RPM |
| Wheel Size: 16″ X 2″ X 5″ |
| Wheelhead: |
|---|
| X Axis Travel Distance: 6″ |
| Swivel Angle: +/- Fixed |
| Least Travel Increment: 0.0001” |
| Rapid Feed Rate: 236 IPM |
| Motor: 5 HP |
| Workhead: |
|---|
| Swivel Angle: Fixed |
| Center Taper: MT-03 |
| Spindle Bore Dia.: 0.79″ |
| Speed: 50-500 RPM |
| Motor: 0.5 HP |
| Table: |
|---|
| Z Axis Travel Distance: 18″ |
| Swivel Angle: 0 ~ 7 Degree |
| Least Travel Increment: 0.0001” |
| Rapid Feed Rate: 315 IPM |
| Tailstock: |
|---|
| Tailstock Quill Stroke: 1″ |
| Tailstock Taper: MT-03 |
| General: |
|---|
| Power Source: AC 230 V / Three Phase / 60 Hz |
| Power Requirement: 6.5kva |
| Overall Dimensions: 82″ x 47″ x 78″ High |
| Weight: 4700 lbs Approx. |
| “No Charges for loading at list Price” |
