OUT OF STOCK

USED-HARDINGE CNC VERTICAL MACHINING CENTER Model VMC 1000 II

Share

Description

USED-HARDINGE CNC VERTICAL MACHINING CENTER Model VMC 1000 II
Make Hardinge
Model No. VMC 1000 II
Year of Manufacture: 2000
Serial # NVC-235
Condition Very Good
  • Features:
  • Troyke 6″ 4th Axis Rotary Table
  • Spindle Taper Cleaner
  • Side Doors with Windows
  • Rigid Tapping
  • 20 Tool Automatic Tool Changer
  • Air Hose w/ Air Gun
  • Worklight
  • Manual Pulse Generator
  • Self-Contained Enclosure
  • Specifications:
  • Travels:
  • X-Axis: 40.16″
  • Y-Axis: 20.08″
  • Z-Axis: 20.08″
  • Spindle Nose to Table (Min.- Max.): 6.10″ – 26.10″
  • Spindle Center to Column: 23″
  • Table:
  • Length: 44″
  • Width: 20″
  • T-Slot Width x No. of Slots: 18mm x 3
  • T-Slot Center Distance: 6.3″ / 160mm
  • Max Weight on Table: 1,540 lbs
  • Spindle:
  • Taper Size: No. 40
  • Speed Range: 8,000 RPM
  • Transmission: Direct Belt Drive
  • Orientation: Non-Contact Magnetic Encoder
  • Draw Bar Tool Clamp Force: 1,760 lbs
  • Draw Bar Tool Ejection Force: 5,390 lbs
  • Torque Base Speed: 61.1 ft-lb / 82.9 Nm (1500 RPM)
  • Feedrates: (All Axes)
  • Rapid and Jog (Max.): 1181ipm / 30m/min
  • Cutting Feed Rate (Max.): 472ipm / 12m/min
  • Axis Motors:
  • Axis Motor Rating: 1.9 hp / 1.42 kW
  • Axis Thrust Rating: 1000 lbs. / 4400N
  • Automatic Tool Changer:
  • Type: Carousel
  • Capacity: 20
  • Max Tool Diameter: 3.5″
  • Max Tool Weight: 13.2 lbs
  • Max Tool Length: 12″
  • Tool-to-Tool(avg.): 6.5 seconds
  • Chip to Chip(avg.): 8.5 seconds
  • General:
  • Air Required: 70 psi, 5 scfm
  • Power: 220v / 66FLA / 3-Phase
  • Overall Dimensions: 160″ x 90″ x 120″
  • Weight: 11,000 lbs

USED-HARDINGE CNC VERTICAL MACHINING CENTER Model VMC 1000 II and Comes as shown in pictures.

GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically, the Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold “as is” or “subject to inspection”. This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege.

WARRANTY: Seller makes no warranties of any kind whatever, expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertain if the specifications, description and condition of the goods confirm to the Buyer’s requirement.
MACHINE USE AND SAFETY: Buyer acknowledges that the goods described herein are pre-owned used goods which were neither designed or manufactured by the Seller, nor has the Seller knowledge of, or control over, the prior use or misuse of said goods: nor does the Seller have knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.
BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

Reviews

There are no reviews yet.

Be the first to review “USED-HARDINGE CNC VERTICAL MACHINING CENTER Model VMC 1000 II”

Your email address will not be published.

VIDEO